Sign In
Register
Help
When I use the bi-amp on the amp, could I run the 4 ohm 15" into the bottom/low side of the amp which is rated for 8 ohms ? Or will I have issues with power or distortion ?
thanks for youe help.
Page 1 of 1
- You cannot start a new topic
Add Reply
GK 800 Head
2 Speaker combinations
Rate Topic:
#1
paolo_pedri 
- Group: Member
- Posts: 1
- Joined: 06-December 08
Posted 06 December 2008 - 09:54 PM
Guys, I have 2 cabinets, 1 SWR with 4 x 10's (8 ohms) and a GK 15" that is rated for 4 ohms.
When I use the bi-amp on the amp, could I run the 4 ohm 15" into the bottom/low side of the amp which is rated for 8 ohms ? Or will I have issues with power or distortion ?
thanks for youe help.
When I use the bi-amp on the amp, could I run the 4 ohm 15" into the bottom/low side of the amp which is rated for 8 ohms ? Or will I have issues with power or distortion ?
thanks for youe help.
MultiQuote
Page 1 of 1
- You cannot start a new topic
- Add Reply